Item # PRS 913-D1000XS Power AGM batteries can save you weight and put the power where it is needed. These top shelf batteries are loaded with features, but are still 1" shorter than other 16 volt batteries which makes them easy to install in tight places.
NOTE: When using a 16 volt battery, you will need to install a 16 volt to 12 volt step down box. The box allows you to run 12 volt items without burning them out. Also, be sure to use a charger designed for 16V batteries.
16 Volt Battery - Deep Cycle (913-D1000)
-SAE Post Terminals included w/ 3/8" bolts
-Strongest 16V AGM Battery Available
-AGM Battery Technology
-Longer Life
-Superior Cranking
-Fast Charge Capability
-Vibration Resistant
-Rugged ABS Case
Specs
16 Volt Battery - Deep Cycle (913-D1000)
-Weight: 46.5 lbs.
-Dimensions: 10.24" L x 6.65" W x 7.2" H - 48.18lbs
-Max Amps: 2400 @ 80° F
-RC Minutes: 84
-CA: 675 @ 32° F
Item # PRS 910-1005This 12V/16V charger from XS Power has multiple settings that allow it to charge a normal 12 volt battery, as well as 16 volt race batteries. Charger has LED indicators and an ammeter to monitor the batterys status.
12V and 16V AGM compatible
25A max output
Three charging modes
LED indicators and ammeter to monitor status
6' heavy duty cables w/ clamps
Built in cooling fan for reliability
Compact size, only 24 lbs.
Constant Current / Constant Voltage
Item # PRS 913-1000XS Power AGM batteries can save you weight and put the power where it is needed. These top shelf batteries are loaded with features, but are still 1" shorter than other 16 volt batteries which makes them easy to install in tight places.
16 Volt Battery - Starting
SAE Post Terminals included w/ 3/8" bolts
Weighs only 30.5 lbs.
AGM Battery Technology
Longer Life
Superior Cranking
Fast Charge Capability
Vibration Resistant
Rugged ABS Case
NOTE: When using a 16 volt battery, you will need to install a 16 volt to 12 volt step down box. The box allows you to run 12 volt items without burning them out. Also, be sure to use a charger designed for 16V batteries.
Item # PRS 916-66006Overall Length: 11.250"
Overall Width: 9.250"
Overall Height: 6.5"
Material Type: Steel
Sold in Quantity: Each
Notes: Holds 10.75" x 7.00" battery, made of 16 gauge (0.060) lightweight steel.
Info
Weld-in style 16 gauge steel battery box. Holds a 10-3/4" x 7" battery.
Item # PRS 916-66007Overall Length: 10.875"
Overall Width: 7.250"
Overall Height: 6.500"
Material Type: Steel
Finish: Zinc Plated
Sold in Quantity: Each
Notes: "Overall" measurments are inside box. Does not include frame mounting bolts.
Info
As featured on Classic Truck’s Week to Wicked. Watch the transformation here!
This zinc plated steel battery tray holds a 10-3/4" x 7" battery. The battery box mounting holes, where it attaches to the vehicle, measure 12-11/16" center to center going side to side. Vertically, the top hole to bottom hole center to center is 5", with mount holes in between at 1" center to center intervals.
Zinc Plated
Holds 10-3/4" x 7" Battery
12 gauge frame and 14 gauge base plate